Insignia TV Remote Codes, How to Program TV Remote, Why do we Need

To use the Insignia Remote Code, you will have to program the remote to use with your TV. This article will discuss about what is Insignia TV Remote Codes, why do we need it, Easy to Follow steps to program Insignia TV using a universal remote.

What is Insignia TV Remote Code

Similar to other new generation TV, InsigniaSmart TValso comes with a remote control or the Insignia universal remote. In a situation where you want to use a remote control from a different brand to program your Insignia TV, you will need the Insignia TV Universal Remote Codes. To use the Remote Codes, you will have to program the remote to use with your TV.

Different types of Universal Remote Codes such as three, four, five digits codes are there for this Insignia TV. Most common code is usually a three digits code. Zero is added in front of three digit codes as just the three digits may not work for most Insignia TV’s.

Fig. 1 – Introduction to Insignia Remote Codes

Why do we need TV Remote Codes

Remote codes are used to adjust various settings such as volume, TV channels, track number, volume etc. The Remote Control and Remote Control device are usually specific to a product line. But there are many Universal Remotes in the market, which emulates the remote control made for most major brand devices.

Insignia TV Remotes and Codes

Some of the most popular Insignia Remote Controls are:

• Insignia NSRCFNA19 Fire Remote Control
• Insignia NSRC4NA17 Remote Control
• Insignia NSRC4NA18 Remote Control
• Insignia NSRCRUDUS19 ROKU Remote Control

Fig. 2 – Insignia TV Remotes

Insignia TV Remote Codes

The different codes are listed below:

• Bose – 10171, 11204, 11326, 11517, 11641, 12002,11564
• General Electric – 1406, 1407, 1408,1181, 1180, 1175, 0456, 0029, 0905 1171, 0103, 0189, 0217, 0135, 0133, 0116, 0167, 1148
• InnovAge – 000, 001, 004, 009, 035, 038, 045
• MasterControl – 350
• One for All – 0054, 1204
• Panasonic – 06, 07, 15, 18, 20, 0017, 0054, 0178, 0317, 0457, 1564, 0171, 1204, 2002, 2003, 2004, 1326, 1517, 1660
• Philips – 0198, 0490 , 0115
• Potenza – 2002, 0171, 1204, 1326, 1517, 1963
• RCA – 12184, 12417, 135, 12049, 11423, 11564, 10171, 10463, 11810, 11892, 11963
• RadioShack – 505, 511, 038,173, 228, 238, 252, 253, 272, 290, 307, 325, 381, 417, 420, 477
• Samsung – 47, 48, 49, 59, 60, 98, 00, 01, 02, 03, 04, 05, 06, 07, 08, 09, 15, 16, 17, 18, 40, 43, 46
• Simplicity – 564, 575
• Sony – 068, 069, 078, 096, 100, 164, 168, 229, 026, 00171, 01204, 01423, 01564, 02049, 10675, 12428,12596, 00171, 01517, 01710, 01780, 01892, 02002, 02049, 20288, 02417
• All In One Insignia TV universal codes – 0150, 0091, 0133, 0029, 0103, 0116
• Four digit universal codes for Insignia TV – 0103, 0189, 0217, 0135, 0133, 0116, 0167, 0456, 0029
• One For All codes for Insignia – 0103, 0189, 0217, 0029, 0135, 0133, 0116, 0167, 0456

How to Program Insignia Universal Remote

The two ways are listed below:

• Program Insignia Universal Remote with Auto Search
• Program Insignia Universal Remote with Manual Method

Program Insignia Universal Remote with Auto Search

All the Universal Codes in the Remote Control goes through scanning process in the auto search method. The procedure of programming Insignia Universal Remote is a sequential step by step process. It should be done carefully. Below are the steps:

1. Turn on the TV for which you want the Universal Remote to operate.
2. Turn on the remote,tap on the device (TV) buttonfor 3 seconds. The LED light shows that the device is all set to program.
3. Point out the remote to device and click on channel switches (CH+ & CH-). Remote will show on/off signals. Press up/down until the device turns off.
4. Check the code by clicking on “Power” button. Device will turn on. Try changing the channels to check if the remote is programmed correctly or not.
5. Click Device button to save the code. LED light will blink twice for confirming the stored code.

Fig. 3 – Universal Remote

Program Insignia Universal Remote with Manual Method

Below is the procedure of programming Insignia Universal Remote with Manual Method.

1. Turn on the TV for which you want the universal remote to operate.
2. Press the “TV” on your remote.
3. Now press and hold the “Setup button” of the Universal Remote until it shows the LED light. It shows that the device is all set to program.
4. Finally enter the code which you have from the program instructions guide.
5. Then point your remote at the TV and then Press and Hold the Power button.
6. Then release the Power button whenever the screen switches off.
7. That’s all. Now your TV will work perfectly with the universal remote control.

How to Check if Insignia Remote is a Universal Remote or not

Some remote controls that comes withInsignia TVsare universal remotes and some are not. If they are universal remotes, you can use the remote to power other gadgets besides Insignia TV. To check if any Insignia remote is a universal remote or not, see for ‘Set’ and ‘Mode’ options. If it does, it is a Universal Remote otherwise not.

Also Read:Project Free TV: How to Use, Alternatives to ProjectFreeTV & AdvantagesXfinity TV Guide – Xfinity Remote Codes, Xfinity TV Go App, Pair RemotesWhat is Smart TV – How it Works, Types, Factors to Consider While Buying